Efficient 2-Blade Heat Powered Stove Fan - No Battery or Electricity Needed for Gas, Pellet, Wood & Log Burning Stoves - Perfect for Fireplace & Home Heating Distribution

Heat Powered 2 Blades Stove FanStove fan requires no electricity or batteries to operate, it uses the heat from your stove to power the fan and efficiently disperses the heat around your room. Why need to use the stove fanWithout a stove fan,the heat produced by your stove collects around the stove and escapes up the chimney. With a stove fan,the warm air is circulated into your room more quickly warm up a chilly room. Features: ● Circulates warm air throughout the room● Powered by heat,speed automatic controlled by temp of stove top● Silent operation,no noise,ready to use out of box● Don't need electricity,no running cost● Upgrade 2 blade stove fan,fast spinning speed up to 1250rmp● Start to work at temperature 60℃ (140℉)● Safe,its inbuilt system to stop them overheat Specifications: Name: Fireplace FanColor: BlackMin Operating Temperature: 60℃/140℉Max Operating Temperature: 400℃/752℉Recommended Operating Temperature: 200-300℃/392-572℉Airflow Range: 150-180 CFMNoise:<32dBSize: 16*13*21cm/6.3*5.1*8.2in (L*W*H)Weight: 650g/1.43lbs Package Included: 1* Stove Fan NOTE: ● Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot.● To move or carry the fan, always use the extendable handle while wearing gloves. Keep fan away from small children when in use.

[Start automatically] Start work when the surface temperature under the fan reaches around 60℃ (140℉). Working with a temperature between 60℃ (140℉) centigrade degree to 400℃ (752℉) centigrade degree. The higher temperature of the stove, the faster the blades spin.Slow down and stop as the stove cools.

[No electricity or battery] Wood stove fan for log burning fireplaces, gets power from the heat produced by your fireplace, wood-burning stove or pellet stove. Powered by heat. Healthy and economical. Effectively dispersing warm air around your room.

[Safety design] A bi-metallic safety device.The fan comes with a bi-metallic safety device in the base of the fan.When the surface temperature rises above around 300℃ (572℉), it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases.

[Save your bill, more efficiency] Fully utilize the heat from your wood stove and disperse it to your room.The fan circulates warm air at a rate of 180 CFM(cubic feet per minute),max rate will reach 270 CFM,and uses 28% less wood. You can enjoy warmth in you room,increasing your comfort.

[Unique blade design] Working quietly,more air flow.Feature with the unique blades design,The stove fan can drive more warm air with silent work.No noise. You will enjoy the warm air in a quiet and comfortable environment.