4 Blade Heat Powered Stove Fan - Silent Hanging Fireplace Fan for Efficient Heat Distribution | Eco-Friendly Wood Stove Accessory | Perfect for Living Rooms, Cabins & Winter Heating

4-BLADE HEAT POWERED STOVE FANNo battery or power supply is required!As long as it is placed on the burning stove, it will absorb the heat to drive the fan to rotate, thereby blowing the hot air above the wood burning fireplace directly to the living area, increasing the air circulation in the room and improving the heating efficiency of the stove.(The rotation speed of the fan varies depending on the temperature of the wood-burning stove. The higher the temperature of the stove, the faster the rotation speed. When the stove temperature is so low that the fire is extinguished, the rotation speed will slow down until it stops.)Note:1. Place the stove fan on the smooth flat surface of the stove top, near the side or back of the chimney.2. Furnace fan is designed for independent stove, and the surface temperature of the furnace is between 65℃-C 350℃). Temperatures above this range may damage the fan and generator set and invalidate your warranty.PRODUCT INFORMATION:Product name: fireplace fanMaterial: AluminaAir volume: 180-210Leaves: 4 leavesWind speed: 750-1050rpmNoise: less than 35dBWorking temperature: 60-350°cOEM: applicableNet weight: 0.71kgsGross weight: 0.87kgsProduct size: 150*180*175mmPacking size: 200*185*195mmColor: black, gold, silver, iron gray, red, bronze, rose red, blueProduct packaging: fireplace fan*1

► NO NEED FOR ELECTRICITY: This fan is not a wind turbine, but it can do what it is supposed to do seamlessly. It moves the air into the space instead of escaping it all. When the furnace surface reaches about 150-200 °C, it will activate perfectly. You can't hear it, and you can't feel the air. However, it does an excellent job of moving the air. The whole room can be kept warm all the time.

► FOUR-LEAF AIR VOLUME: Upgrade the four-leaf, warm air fills the entire room. Just place the stove fan on the smooth and flat surface of the stove top, near the side or back of the stovepipe. The stove fan needs to be placed at least 4" away from the stovepipe. It will work when the stove surface is hot.

► OVERHEATING PROTECTION: The built-in bimetallic strip can slightly raise the edge of the fan when it is close to the maximum operating temperature to protect the motor and thermoelectric module.

► ANODIZED ALUMINUM MATERIAL: The entire fan is made of anodized aluminum, which will not rust or corrode when the fan gets hot.

► SILENT MODE: Professional structural design provides you with the best operating environment, and the sound is less than 35 decibels at room temperature.