JD-ESSMO Army Green Flock Heat Transfer Vinyl HTV Sheet for T-Shirts - 20" Wide x 96" Long Iron-On Vinyl for Heat Press - Perfect for DIY Apparel, Custom Hoodies, and Personalized Gifts

Material Specification:PU CompositionThickness:757 Microns / 29.5 Mils (Please make sure plotter is capable of cutting such thickness)Heat pressure sensitive backingFlock FinishApplication Instruction (Home Iron)Set iron dial between Cotton and LinenCover design with Kraft paper or non-stick cover sheetPlace on flat, hard surface (ironing board not recommended)Press iron with medium/firm pressure (do not slide iron)Press each section of design for 10-15 secondsIf areas of design lift after application, replace cover sheet and re-press for 5-10 secondslet it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.Application Instructions (Heat Press)Cut in reverseWeed excess materialPreheat all fabric prior to pressing for best resultsApply design at 305F/150C-160°C for 12-15 secondslet it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.Applies to:100% CottonPoly / Cotton Blends100% PolyesterLeatherLaundering:Wait 24 hours before 1st washMachine wash warm or cold / mild detergent (Max 60°C)Dry on normal dryer settingDo not bleach or dry clean

Specifications PU composition Pressure sensitive backing Matte finish 757 Microns / 29.5 Mils 45°/60° blade Can be layered

Applies to 100% cotton 100% polyester Poly/cotton blends Leather

Heat Application Time 10-15 Seconds Temperature 305° F / 150° C PressureMedium Peel HOT or COLD

Care Instructions Machine wash WARM or COLD / mild detergent Dry at normal setting No chlorine bleach Wait 24 hours before first wash