Owens Corning VentSure 4ft. Strip Heat & Moisture Ridge Vent (10-Pack) - Roof Ventilation for Attic Cooling & Moisture Control in Residential Homes

The Owens Corning VentSure Heat & Moisure Ridge Vent works with VentSure and VentSure InFlow intake vents to help improve the overall air flow through the attic. Each piece is flexible enough to conform to virtually any roof slope ranging from a 3/12 to a 16/12 pitch. They have a unique baffle design and Weather Protector moisture barrier that helps improve the overall performance of the air flow. VentSure Intake Ridge Vents from Owens Corning maximizes the protection of the roof deck and are designed to also work with undereave soffit vents to help advance the flow of cool, dry air upwards through the attic. Excellent versatility – patent-pending corrugated ridge design and alignment tabs allow for additional flexibility and strength to accommodate virtually any roof pitch, resulting in a strong uniform ridgeline. Roof durability – proper ventilation helps maximize the performance of the entire roof system. UV Resistant. Applicable Standards & Approvals: UL ER21292-01, ICC-ES AC132, FBC - TAS100(A) Wind-Driven Rain up to 110 MPH, TDI Approved For Use in Windstorm Catastrophe Areas, Florida Product Approval. and Miami-Dade Product Approval.

Comes with Nails

Does not come with a screen

Net Free Vent Area 80 sq. in. per strip / 20 sq. in. per lin. ft.

Unique design – flat baffle improves air flow by keeping leaves, pine needles or similar debris from impacting the performance of the vent

Shingle Over Width 12in. Nominal Length 48in. (4ft.) Nominal Width 15in. Nominal Height 1in.